16
To optimise your dishwasher for the local water hardness, please follow the steps below and refer to the
above table.
1. After resetting the dishwasher, press and hold the Program button and then press the
On/Off Mode
button.
2. Keep the Program button pressed until “SL” disappears from the display window.
3. Release the Program button, the display window will display the latest entered water hardness setting.
4. Press the Program button repeatedly to adjust the water hardness level.
5. After adjusting the water hardness level, press the
On/Off Mode button to save the setting.
SDW60B12_IB_120522_Funnel Image_Pauline.indd 16 12年5月22日 下午10:36
To Next Page
Loading...
