Sandstrom SHFUSB10 - AUX Input Operation

GB-21
Safety Warnings
Product Overview
Connections
Maintenance
Operation
Hints and Tips
and Specification
• You can set the daily timer only in standby mode.
• The operating time of every step shouldn’t be longer than 10 seconds or it will return to the
time display.
• Please select the sound source before turning into standby mode. e.g. CD, Radio.
To cancel the daily timer setting
In standby mode, press the SLEEP/TIMER button repeatedly until the “ON” is ashing.
Press the VOL
+
/
–
button to set the daily timer to “OFF”. Press the
SLEEP/TIMER button again to nish.
Disconnecting the mains from the unit also cancels the daily timer.
AUX Input
There is a RCA (L/R) sockets located at the back of the unit. Analogue audio sound signals
from other sources can be input to the unit through these 2 sockets.
1. Connect the input to another audio device via an audio cable (not included) with RCA
(L/R) socket.
2. Press the FUNCTION button repeatedly or press the button on the remote
control to select the AUX Input function until “AUX“ appears on the display.
3. Adjust the volume control for your desired sound output level.