EasyManua.ls Logo

Sangean DT-800 - Page 20

Sangean DT-800
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
019
Weather Band and weather alert
operation (USA version only)
When the radio is in the weather band mode, press and hold the
BAND button until ALERT appears on the display. Continuously
press and hold the BAND button, this will cycle through the required
2-4-6-8-16 H (hour) of ALERT time. Release the BAND button when
the required alert time is chosen. The Display will appear with ALERT
indicating the weather alert function is activated.
When the weather alert sounds, press any button to enter the
weather band.
When the set Alert time has elapsed, the Alert is deactivated and
ALERT disappears from display.
To cancel a weather alert, press and hold the BAND button until the
display appears OFF and ALERT disappears from display.
2.
3.
4.
5.
To get your local weather station information, you can visit NOAAs
website at http://www.nws.noaa.gov/nwr
To get a better signal, it is recommended to plug in the supplied FM
wire antenna into the earphones jack.
REMARKS

Related product manuals