Need help?Do you have a question about the Sangoma s705 and is the answer not in the manual?
User presses the Menu button to initiate Bluetooth setup.
Navigate to and select the 'Setting' option from the main menu.
Select 'Basic Setting' from the settings menu.
Navigate to and select the 'Bluetooth' option.
Enable Bluetooth by toggling the switch to 'On' and saving settings.
Select 'Paired Bluetooth Device' and initiate a scan for nearby devices.
Select a discovered Bluetooth device and press the 'Connect' button.
Initiate the disconnection process by pressing the Menu button.
Select the device to disconnect and press the 'Disconnect' button.
General| Power Supply | PoE or optional AC power adapter |
|---|---|
| Headset Port | RJ-9 |
| Protocols | SIP |
| SIP Accounts | 6 |
| Opus Support | Yes |
| Bluetooth | No |
| Wi-Fi | No |
| Supported Codecs | G.711, G.722, G.729, Opus |
| Audio | High-definition (HD) audio |
| Lines | 6 lines |
| Ethernet Ports | 2 (10/100/1000 Mbps) |
| PoE | Yes (802.3af) |
| Expansion Module | Yes |
To Next Page
