EasyManua.ls Logo

Sanitron S17A - User Manual

Sanitron S17A
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Owner’s Manual
Owner’s Manual
S
IN
CE 1963
Manufacturers / Engineers / Sales / Service
Germicidal Ultraviolet - Equipment & Lamps
0DUFXV%RXOHYDUG+DXSSDXJH1<
)D[
HPDLOLQIR#XOWUDYLROHWFRP
Extensive Product Information Available at:
ultraviolet.com
Document No. 98-1377B9 • August 2014 • ©2014 Atlantic Ultraviolet Corporation®
Installation,
Operation
& Maintenance
Read and Follow All Safety Instructions. Save These Instructions
Models S17A, S23A, S37C & S50C
I
n
s
t
a
l
l
a
t
i
o
n
U
LTRAVIOLET WATER PURIFIERS
®

Table of Contents

Questions and Answers

  • D
    david35Aug 9, 2025
    Why is my Sanitron Water Filtration System showing poor performance?
    • D
      david67Aug 9, 2025
      Several factors can lead to poor performance or low UV intensity in your Sanitron Water Filtration System. The quartz sleeve or sensor probe lens might be dirty, requiring cleaning. The germicidal lamp could be nearing its end of life and needs replacement, or it may not be functioning at all, also requiring replacement. Low input voltage could be the culprit, so verify the voltage to the purifier. Lastly, a change in water quality might be the reason; in this case, have your water tested to ensure it meets the recommended concentration levels for the purifier.
  • J
    James ManningAug 25, 2025
    What to do if water is leaking from my Sanitron Water Filtration System?
    • M
      Maurice CostaAug 25, 2025
      If your Sanitron Water Filtration System is leaking, several issues could be the cause. The quartz sleeve might be cracked or broken, requiring you to shut down the purifier, drain it, and replace the sleeve. The quartz sleeve sealing o-rings could be worn or damaged; in this case, shut down the purifier, drain it, and replace the sealing o-ring. Poor or loose connections or fittings could also be the cause. Try tightening any suspect connections or fittings. If that doesn't work, shut down the purifier, drain it, remove the fitting or connection, clean the threads, reapply thread sealing tape, and reinstall.

Sanitron S17A Specifications

General IconGeneral
Weight8 lbs
Power SupplyStandard electrical outlet
Warranty1 year limited
Chamber MaterialStainless Steel
Voltage120V
Filtration TechnologyUltraviolet (UV) Sterilization
Stages of Filtration1
Filter Life9000 hours
Storage Tank CapacityN/A (Inline system, no storage tank)
LampUV-C Lamp