To Next PageTo Next Page
Need help?Do you have a question about the Sanjian Studio PLJ-8LED-C and is the answer not in the manual?
Specifies available gate times for frequency measurement.
Details performance for low, high, and auto frequency measurement channels.
Configuration options for intermediate frequency and offset.
Details the module's frequency reference source and stability.
Specifies the required DC input voltage and current consumption.
Describes the LED readout and brightness levels.
Provides physical dimensions and weight of the module.
Lists the available input/output connectors and their functions.
Describes the physical layout and components of the module.
Provides the physical mounting hole dimensions for the module.
Details the preparation and initial steps for operating the frequency counter module.
Explains the system settings and menu navigation for the frequency counter.
Explains how input signals are filtered and the purpose of filtering.
Describes the Least Significant Digit (LSD) blanking mode.
Details settings for LED brightness levels.
Shows how gate times are adjusted for frequency display.
Outlines the procedure for performing a system reset.
Explains how to select and program intermediate frequencies using the ICSP interface.
Describes how to connect signals and perform frequency measurements.
Lists the specifications and features of the PLJ-8LED-C module.
Itemizes the contents included in the product package.
Provides important warnings and guidelines for safe and proper use.
Details the measured accuracy and stability of the frequency counter.
Presents sensitivity measurements for low and high channels via graphs.
Discusses UHF channel measurements and potential issues, though no schematic is provided.
Addresses the reliability of automatic channel switching and display issues.
Specifies available gate times for frequency measurement.
Details performance for low, high, and auto frequency measurement channels.
Configuration options for intermediate frequency and offset.
Details the module's frequency reference source and stability.
Specifies the required DC input voltage and current consumption.
Describes the LED readout and brightness levels.
Provides physical dimensions and weight of the module.
Lists the available input/output connectors and their functions.
Describes the physical layout and components of the module.
Provides the physical mounting hole dimensions for the module.
Details the preparation and initial steps for operating the frequency counter module.
Explains the system settings and menu navigation for the frequency counter.
Explains how input signals are filtered and the purpose of filtering.
Describes the Least Significant Digit (LSD) blanking mode.
Details settings for LED brightness levels.
Shows how gate times are adjusted for frequency display.
Outlines the procedure for performing a system reset.
Explains how to select and program intermediate frequencies using the ICSP interface.
Describes how to connect signals and perform frequency measurements.
Lists the specifications and features of the PLJ-8LED-C module.
Itemizes the contents included in the product package.
Provides important warnings and guidelines for safe and proper use.
Details the measured accuracy and stability of the frequency counter.
Presents sensitivity measurements for low and high channels via graphs.
Discusses UHF channel measurements and potential issues, though no schematic is provided.
Addresses the reliability of automatic channel switching and display issues.
General| Brand | Sanjian Studio |
|---|---|
| Model | PLJ-8LED-C |
| Category | Control Unit |
| Language | English |
