Sankey CLCD-2630 - ALIGNMENT; Factory Alignment Procedure

To Next Page

To Previous Page

- 8 -

FACTORY

1. This mode uses the special remote control. Turn on the LCD TV. Press SMODE until

“Theater” display on the screen. Press SLEEP until “120min” display on the screen. Press the

green button.

2. The factory mode will be displayed.

3. Access the adjustment mode by pressing the ◄/► button. The adjustment parameters

adjusted are listed in the accompanying table, and they are selected by pressing the ▲/▼

button.

4. Press ◄/► button to select the selection, adjust item value, or enter sub menu.

5- ALIGNMENT