- 6 -
Installing the batteries in your remote control
1. Pull the tab of the back cover and pull up on the cover to
open the battery compartment.
2. Insert two AAA size batteries. Make sure to match the
(+) and (-) ends of the batteries with the (+) and (-) ends
indicated in the battery compartment.
3. Align the lower tabs of the back cover to the remote
control and snap the cover into place.
4- Illustration of the remote control
If the remote controller is not used for a long time,
please take the batteries out to avoid damages caused
by the leaking liquid.
Please use the remote controller carefully. Do not drop
the remote controller on the ground. Keep the remote
controller away from moisture, sunshine, and high
temperature.
To Next Page
Loading...