Sankyo STD-1700 - Lubrication Guide

7.LUBRICATION
Reel shaft Mitsubishi Apply oil to contact surface between
reel shaft and reel disc.
Flywheel-capstan | Mitsubishi (1) Apply oil to contact surface
shaft/Adjusting between capstan shaft (3) and
screw hollow SG101 metal bearing. 2
[fy
(2) Apply grease to end of capstan Y Y/;
shaft and hollow of thrust YN G
ae Grease
adjusting screw (82).
@ Adjusting screw
Supply reel disc Mitsubishi Apply oil to contact surface between
felt (90) and reel disc (77).
Take-up reel disc | Mitsubishi Apply oil to take-up reel disc where
detect cam (86) contacts,
Grease
Detect
cam
$G
101
Apply
grease
to
the
detect
pin
guide
slot
in
detect
cam
(86).
Mitsubishi
Apply
oil
to
detect
cam
where
compression
spring
(87)
contacts.
Shut-off Apply grease to the worm and
assembly gear surfaces.
Apply grease to both ends of
compression spring.
Apply grease in the slot through
which lever and link are linked.
if
|
Grease