To Next PageTo Next Page
Need help?Do you have a question about the Sankyo STD-1700 and is the answer not in the manual?
Identifies controls and indicators on the front panel of the cassette deck.
Details the input and output connectors on the rear panel.
Shows the top internal layout and component identification.
Illustrates the bottom internal layout and component identification.
Describes the function of the voltage regulator circuit for stable operation.
Explains the Dolby NR circuit and headphone amplifier performance.
Provides step-by-step instructions for inserting and removing cassette tapes.
Instructions for safely removing the outer casing (bonnet) of the unit.
Steps for detaching the bottom panel to access internal components.
Guidance on removing the front panel, including control knobs.
Procedures for detaching the cassette loading mechanism housing.
Adjusting the gap between the capstan and pinch roller for correct tape feed.
Setting the pinch roller arm for smooth tape engagement during pause.
Adjusting torque for supply and take-up reels for proper tape tension.
Fine-tuning the auto shut-off lever and detect cam for reliable operation.
Adjusting the pinch roller spring for optimal tape pressure.
Setting the correct clearance for the motor pulley.
Adjusting the flywheel thrust clearance for smooth rotation.
Adjusting the head lever for correct muting switch activation timing.
Checking and adjusting tape speed and wow/flutter levels.
Procedures for cleaning heads, capstan, and pinch roller.
Diagrams illustrating playback signal flow and level adjustments.
Diagrams showing recording signal paths and level adjustments.
Provides voltage readings at various points for diagnostics.
Instructions for adjusting the MPX filter for optimal output.
Procedure for setting the bias oscillator to the correct frequency.
Adjusting head alignment for maximum playback output.
Calibrating playback levels and VU meter indicators.
Adjusting frequency response for accurate playback equalization.
Setting the recording level and bias current for optimal recording.
Adjusting bias current for proper recording on different tape types.
Lists common mechanical problems and their solutions.
Lists common electrical faults and their corresponding countermeasures.
Detailed circuit diagrams for the STD-1800 model.
Comprehensive list of electronic components with part numbers.
Diagrams showing component placement and wiring for STD-1800.
Specific mounting and wiring details for the Dolby P.C.B.
General| Brand | Sankyo |
|---|---|
| Model | STD-1700 |
| Category | Cassette Player |
| Language | English |
