Why SANLI Lawn Mower engine does not start?
If the engine of your SANLI Lawn Mower doesn't start, try the following: ensure you've selected the correct setting, replace the spark plug cap, fill the fuel tank, and open the fuel valve.
What to do if my SANLI Lawn Mower engine runs irregularly?
If your SANLI Lawn Mower engine runs irregularly, you can try to clean or replace the air filter, clean the spark plug, or drain the fuel tank and refill it with unleaded 95 RON minimum.
What to do if my SANLI LSP 510 S9A has heavy vibrations?
If you notice heavy vibrations from your SANLI Lawn Mower, try these solutions: tighten the screws and bolts, check the blade attachment bolt, or replace the blade.
What to do if SANLI LSP 510 S9A Lawn Mower has fall in engine power?
If you experience a fall in engine power in your SANLI Lawn Mower, you can clean or replace the air filter and clean the throttle assembly.
What to do if SANLI Lawn Mower engine becomes excessively hot?
If the engine of your SANLI Lawn Mower becomes excessively hot, carefully clean the engine exterior and check the oil level.
Why SANLI LSP 510 S9A transmission drive loses efficiency?
If the transmission drive on your SANLI Lawn Mower operates but loses efficiency, adjust the cable using the tensioning device.
What to do if SANLI LSP 510 S9A Lawn Mower engine engages, but starting is difficult?
If your SANLI Lawn Mower engine engages, but starting is difficult, fully press the operator presence control lever and change the oil.
Why SANLI LSP 510 S9A Lawn Mower has inadequate ejection of cut grass?
If your SANLI Lawn Mower has inadequate ejection of cut grass into the collector bag and/or excess grass clippings are left on the surface, advance the throttle to maximum, raise the cutting height, replace the blade, and clear any blockage or clean the bag.
How to fix uneven finish with SANLI LSP 510 S9A Lawn Mower?
To fix an uneven or poor finish with yellowing of the longer/lower grasses when using your SANLI Lawn Mower, sharpen or renew the blade, raise the cutting height, and advance the throttle to maximum.
General| Brand | SANLI |
|---|---|
| Model | LSP 510 S9A |
| Category | Lawn Mower |
| Language | English |
Contact details for Sanli UK Ltd, including address, website, email, and phone number.
Contact details for Sanli France Sas, including address, website, email, and phone number.
Contact details for Sanli Australia Development P/L, including address, website, email, and phone number.
Lists the tools and accessories included with the mower, such as spark plug socket, wrenches, and spanner.
Congratulates the user on their purchase and expresses confidence in the mower's quality and performance.
Explains the importance of understanding mower labels and symbols for safe and efficient operation.
Details pre-operation checks, including familiarizing with controls, checking parts, and blade condition.
Provides guidance on safe mowing practices, including daylight conditions, personal attire, and avoiding hazards.
Outlines procedures for after-use care, such as cooling the engine and storing safely away from heat sources.
Covers initial setup, including mower assembly, fitting handles, and cable connections.
Explains how to correctly fill the engine with oil, specifying type, quantity, and checking the level.
Provides instructions for safely filling the fuel tank with unleaded petrol, including precautions against fire hazards.
Guides on how to adjust the mower's cutting height for optimal results based on mowing conditions.
General instructions for operating the mower, including pre-start checks and safety device verification.
Step-by-step instructions for starting the engine, including throttle and control lever operation.
Explains how to engage the self-propelled feature using the power drive lever and how to control movement.
Details the procedure for safely stopping the engine and blade using the operator presence control.
Provides guidelines for cleaning the mower after use to prevent corrosion and ensure proper function.
Explains how to store the mower properly, especially for extended periods or winter, emphasizing dry and ventilated areas.
Outlines steps for preparing the mower for transport, including emptying fuel and folding handles.
Details critical maintenance tasks like blade care, spark plug, air filter, engine oil, and transmission adjustment.
Covers sharpening, removing, and mounting the mower blade for optimal performance and safety.
Procedures for checking, cleaning, and replacing the spark plug to ensure proper engine ignition.
Instructions for checking, cleaning, and replacing the air filter to maintain engine efficiency and longevity.
Details on checking the engine oil level and the correct procedure for changing the oil.
Explains how to adjust the transmission cable for proper engagement and to prevent premature wear.
Provides a summary table of regular maintenance tasks required for the mower based on frequency.
Lists detailed technical specifications for the SANLI lawnmower models, including engine, dimensions, and performance metrics.
A guide to diagnosing and resolving common problems encountered with the mower, such as engine not starting or irregular running.
SANLI's recommendations for environmentally responsible operation and disposal of fluids.
Information on how to contact SANLI for after-sales support, repairs, or replacement parts.
Instructions for validating the warranty by registration and details on what the warranty covers and excludes.
Lists conditions under which the warranty becomes null and void, such as improper use or non-genuine parts.
Declares that the SANLI lawnmower conforms to relevant EU directives regarding machinery and noise emission.
A form for users to register their machine to validate the warranty, including personal and machine identification details.
To Next Page
