SANLI Red Back - Lower Handle Bar Assembly; Attach Lower Handle Bar; Locate Starter Cord

1.
2.
3.
PAGE 4
Remove and ensure you have all the parts
required for assembly (see page 2 for reference)
Parts required:
4 x Bolts and Nuts
1. LOWER HANDLE BAR ASSEMBLY
1.
1. Lower Handle Bar Assembly
Attach lower handle bar bolts. Take the
weight of the handle bar and fit the lower
1.
3.
2
2a. Locate the Starter Cord
Pull the starter cord up to the spring
and hold the cord at the lower side
ofthe spring. Rotate the string clockwise
around the spring.
INSTRUCTION MANUAL