Sanlien Palert - TEST MODE

USER MANUAL
Version 2 17/11/2017
© Jenlogix 2017 Jenlogix
Page 27 of 40
3.11.10 RELAY CONTROL
(To be implemented)
[RELAY_BLINK_MODE]
To switch relay status on/off every second.
[RELAY_CONTROL_BY_ERR]
While system detects errors, drive the relay
[RELAY_RESET_BY_MANUAL]
Reset relay manually
[SINGLE_RELAY_MODE]
Event trigger after a relay trigger.
3.11.11 API
[API_CONFIG]
setup API parameter
EARTHQUAKE_FALLING_API
After the end of the event, driving API, Upload
event with record function.
3.11.12 UPLOAD AN EVENT RECORD
[VWHUB_CONFIG]
Upload an event record set parameter
FTPIP
FTP server IP
FTPPORT
FTP server Port
USER
FTP server user account
PASSWORD
FTP server user Password