Need help?Do you have a question about the Sansui 1000A and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Total Harmonic Distortion | 1% at rated output |
| Input Sensitivity (phono) | 2.5mV |
| Channel Separation | 50dB |
| Frequency Response | 20Hz to 20kHz |
| Speaker Load Impedance | 4 to 16 ohms |
| Valve Complement | 7591, 12AX7, 6AN8 |
| Input Sensitivity | 250mV |
| Tubes | 4 x 7591, 4 x 12AX7, 2 x 6AN8 |
General introduction to the Sansui 1000A amplifier, highlighting its capabilities.
Highlights the primary features of the Sansui 1000A, such as power output and tuner sensitivity.
Details the 80W power output and its low distortion characteristics.
Highlights the sensitive FM tuner using Nuvistor tubes for improved reception.
Covers power output, distortion, frequency response, and input sensitivity.
Details FM frequency range, sensitivity, selectivity, and separation.
Specifies AM frequency range, selectivity, and sensitivity.
Instructions for connecting FM and AM antennas for optimal reception.
Steps for connecting a turntable, including input sensitivity notes.
Explains the function of various switches and knobs on the front panel.
Explains how to connect and disconnect the power supply.
Describes how to adjust the sound balance between left and right speakers.
Step-by-step instructions for using the amplifier functions.
Step-by-step guide for operating the record player function.
Instructions for recording and playback using a tape recorder.
Provides common symptoms and likely defective parts for diagnosis.
To Next Page
