Need help?Do you have a question about the Sansui 210 and is the answer not in the manual?
General| Power Output | 10 watts per channel into 8Ω (stereo) |
|---|---|
| Damping Factor | 30 |
| Channel Separation | 50dB |
| Speaker Load Impedance | 8Ω to 16Ω |
| Input Impedance | 50k ohms |
| Frequency Response | 20Hz to 20kHz |
| Input Sensitivity | 2.5mV |
Instructions for connecting speakers to the receiver for audio output.
Steps for tuning into AM and FM radio broadcasts and using the tuning meter.
Troubleshooting steps for blown quick-acting and power fuses.
Diagnosing and resolving issues causing booming noise during playback.
How to adjust the voltage selector for different power line voltages.
Parts list for the AM, FM, and MPX circuit block.
To Next Page
