Need help?Do you have a question about the Sansui 3000 and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Total Harmonic Distortion | 0.8% |
| Input Sensitivity | 2.5mV (MM), 200mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Signal to Noise Ratio | 85dB (line) |
| Channel Separation | 50dB |
| Type | Stereo Amplifier |
| Semiconductors | 24 transistors, 12 diodes |
Troubleshooting no sound, distortion, tuning noise, and channel separation in FM/FM-MPX.
Diagnosing hum, surface noise, and no sound issues with record players and tape decks.
Addressing weak sound, distortion, hum, or noise affecting all program sources.
Resolving issues with tuning meters, FM-AFC, and muting switches.
Detailed procedure for aligning the FM tuner circuits.
Detailed procedure for aligning the AM tuner circuits.
Instructions for removing the unit's front panel and dial mechanism.
Detailed circuit schematic and functional block overview of the unit.
Diagrams showing the physical placement of components on circuit boards.
Comprehensive component list, designators, abbreviations, and color code explanations.
To Next Page
