Need help?Do you have a question about the Sansui AU-D11 II and is the answer not in the manual?
General| Damping Factor | 100 |
|---|---|
| Input Sensitivity (line) | 150 mV |
| Signal-to-Noise Ratio (line) | 100 dB |
| Input sensitivity (MC) | 0.25 mV |
| Input sensitivity (MM) | 2.5 mV |
| Signal to noise ratio (MC) | 74dB |
| Channel separation (line) | 70 dB |
| Input Sensitivity (DIN) | 150 mV |
| Channel separation (MM) | 70 dB |
| Speaker load impedance | 4Ω to 16Ω |
To Next Page
