Sansui FR-4060 - 1. SPECIFICATIONS

1. SPECIFICATIONS
TYPE, tet aeteottindoaiae otuts two-speed belt-driven automatic turntable
AUTOMATIC OPERATION ...... automatic lead-in, return, cut and repeat by.
3r.p.m. synchronous motor
PLATTER ..... Mere Laa ape nelt ee aluminum alloy die-cast, diameter 300 mm¢
(12”), weight 1.7 kg (3.8 Ibs.)
MOTOR? shee Peaches recor ee? 4-pole synchronous
SPEED “ps sade-n be pau s hain tase 33% r.p.m. and 45r.p.m.
WOW and FLUTTER........-.-- less than 0.06% (W.R.M.S.)
SIN: RATIO iets ce oct dwcascekicae ath better than 50dB
TONEARM ........-00 00 eee eee statically balanced S-shaped tubular tone-
arm with lateral balancer, inside force
canceler, direct read-out stylus pressure
dial, 4-contact plug-in head shell
TONEARM LENGTH ........------ 220mm (85%)
OVERHANG ... eee eee eee ee eee 15mm (%")
STYLUS PRESSURE ALLOWANCE ..0~3g
USABLE CARTRIDGE WEIGHT ....4~20g(using head shell and subweight
supplied)
CARTRIDGE ........-00 eee eens moving magnet type (SV-27)
FREQUENCY RESPONSE .........- 10~ 23,000Hz
OUTPUT VOLTAGE .....----.00-- 3.5mV at 1,000Hz 50mm/sec.
LOAD IMPEDANCE .........- ....50kQ
STYEUS: vs eos ia Shichi a sheds 0.5 mil, diamond spherical (SN-27)
OPTIMUM STYLUS PRESSURE ....1.5g~2.0g
POWER REQUIREMENTS........ 420V or 240V, 50Hz or 60Hz
POWER CONSUMPTION ......13W
DIMENSIONS ..........-2.-008- 469mm (1814”)W, 204mm(8”)H, 381mm(15”)D
WEIGHT. sisi anise eae le eee eee 10.6 kg (23.4 lbs.)
*
Design
and
specifications
subject
to
change
without
notice
for
improvements.