Selecting the HDMI
audio input source
When you use PC/HDMI AUDIO IN jacks with
HDMI or DVI device, you must select HDMI audio
input source from "HDMI" or "DVI'.
Press MENU. The menu screen will
appear.
Press • or • to select"Audio", then =,-or
press
ENTER.
Press • or • to select"HDMI1 Audio".
Press • or =,-to select"HDMl" or "DVI'.
4
HDMI:
When you connect the HDMI device to
the TV, select this setting.
DVh When you connect the DVl device to the
TV with analog audio cords, select
this setting.
Press EXIT to return to the normal screen.
Turning off the built-in
speakers
Use this feature to turn the TV speakers off when
you connect an audio system (see pages 16).
Press MENU. The menu screen will
appear.
Press • or • to select"Audio", then =,-or
press
ENTER.
Press • or • to select"Speakers".
Press • or =,-to select "Off".
Press EXIT to return to the normal screen.
To turn on the built-in speakers:
Select "On" in step 3 above.
Adjusting the back
lighting
The Backlight feature adjusts the screen
brightness for improved picture clarity.
Press MENU. The menu screen will appear.
Press • or • to select"Setup", then press _ or
ENTER.
Press • or • to select"Backlight".
Press • or _ to adjust the setting.
Press EXIT to return to the normal screen.
Setting the Auto Shut Off
If the Auto Shut Off feature is On, a station being
viewed stops broadcasting and the TV is not
operated, the TV will automatically shut itself off
after 15 minutes.
Press MENU.The menu screen will appear.
Press • or • to select"Setup", then press _ or
ENTER.
Press • or • to select"Auto Shut Off".
Press • or _ to select "On" or "Off".
Press EXIT to return to the normal screen.
Resetting your settings
The Reset function returns your settings to the
factory settings.
Press MENU.Then • or • to select"Setup",
press
then press I_ or ENTER.
Press • or • to select"Reset".
Press I_ or ENTER to return settings to the
your
factory settings.
"Reset" will on the screen 3
appear approx.
seconds, then it returns to the normal screen.
NOTE:
• You also can reset the settings by pressing RESET
when "Picture" and "Audio" menu is displayed.
26
To Next Page
Loading...
