To Next PageTo Next PageWhat to do if my Sansui DTV3200 remote is not working?
If your Sansui TV remote isn't working, the batteries might be weak, dead, or inserted incorrectly; replace or correctly insert them. Move closer to the TV (within 15 feet). Make sure the remote is aimed at the sensor and there are no obstructions between the remote and the TV. Also, ensure the power cord is plugged in.
How to fix poor sound on Sansui DTV3200 TV?
If you're experiencing poor or no sound on your Sansui TV, the station or cable might be experiencing problems; try tuning to another station. Check the sound adjustments (volume and mute). Also, check for sources of possible interference.
Why is there poor picture quality on my Sansui DTV3200?
If you are experiencing poor picture quality on your Sansui TV, it could be due to the station or cable experiencing problems; try tuning to another station. Make sure channels are set into memory. Check the antenna or cable connections and adjust the antenna. Look for sources of possible interference and check the picture control adjustments.
What causes poor reception on some channels on Sansui TV?
Poor reception on some channels on your Sansui TV can be caused by the station or cable experiencing problems; try tuning to another station. Make sure the channels are set into memory. The station might be weak, so adjust the antenna to receive the desired station. Also, check for sources of possible interference.
How to fix poor color on Sansui DTV3200?
If your Sansui TV has poor or no color, the station or cable might be experiencing problems; try tuning to another station. Make sure channels are set into memory. Check the picture control adjustments, antenna or cable connections, and adjust the antenna. Also, check for sources of possible interference.
What to do if my Sansui TV does not operate?
If your Sansui TV does not operate, make sure the power cord is plugged in and try another AC outlet. Check the fuse or circuit breaker. Unplug the unit for an hour, then plug it back in.
How to fix horizontal or diagonal bars on Sansui DTV3200 TV screen?
To fix horizontal or diagonal bars on your Sansui TV screen, check the antenna connections, and adjust or re-direct the antenna. Also, check for sources of possible interference.
How to get CATV reception on Sansui DTV3200?
To get CATV reception on your Sansui TV, check all cable connections. Set the TV/Cable menu option to the cable mode. Try another station.
How to fix digital broadcasting screen problem on Sansui TV?
To fix digital broadcasting screen problems on your Sansui TV, check the digital signal strength.
Why does my Sansui DTV3200 shut off by itself?
Your Sansui TV might be shutting off because the tuned station has no broadcast, so try tuning to a station with a broadcast. The Sleep Timer may be set, so disable it. Also, there may be a power interruption, so check the power supply.
General| Display Technology | LCD |
|---|---|
| Screen Size | 32 inches |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| USB Ports | 1 |
| Built-in Speaker | Yes |
| Resolution | 1366 x 768 |
Instructions for safe operation and reading guidelines.
Guidelines for connecting and using the power supply.
Overview of the television's main capabilities and technologies.
Identification and description of buttons and sensors on the TV's front.
Description of input and output jacks located on the TV's rear.
Instructions for connecting various types of antennas to the TV.
Guidance for connecting basic and scrambled cable TV services.
Step-by-step guide for initial TV setup, including language and channel tuning.
Instructions for turning on the TV, adjusting volume, and selecting channels.
Procedure for programming TV channels into memory for easier access.
How to set up parental controls using the V-Chip rating system.
Adjusting picture size, color, brightness, and audio modes.
Enabling and customizing closed caption text display.
Checklist for resolving common TV problems and symptoms.
Contact details for customer service and technical assistance.
Technical details including dimensions, power, and input/output specifications.
Details of the manufacturer's warranty coverage and conditions.
