Need help?Do you have a question about the Sansui RX-710 and is the answer not in the manual?
Power| power output | 15 watts per channel into 4 ohms |
|---|---|
| maximum output power | 20 watts per channel into 4 ohms |
| power requirements | DC 12.0V (Usable: 10.8 ~ 15.6V, Rated: 14.4V) |
| current consumption | 3.8A Maximum |
Audio Performance| signal to noise ratio | 45 dB |
|---|---|
| image response ratio | 50 dB at 1, 000 kHz |
| total harmonic distortion | less than 0.05% at 5 watts |
Tape Specifications| tape speed | 4.8 cm/sec |
|---|---|
| frequency response | 30 Hz to 40, 000 Hz+3 dB |
| signal-to-noise ratio with metal tape | Better than 52 dB (DOLBY NR OFF), Better than 62 dB (DOLBY NR ON) |
Dimensions and Weight| dimensions | 179 mm (7-1/16”) W x 50 mm (2”) H x 150 mm (5-15/16”) D |
|---|---|
| weight | 1.55 kg (3.4 lbs) net |
| stereo separation | 35 dB at 1 kHz |
To Next Page
