Sansui SR-929 - Page 28

SOME USEFUL HINTS
Keep the stylus tip clean
Dust and dirt are the major obstacles to noise-free record reproduction.
When grime is allowed to collect in the record groove it will stick to the
stylus tip, thus accelerating record and stylus wear and moreover
deteriorating the quality of the reproduced sound. CD-4 records in
particular require extra care.
Every time you play a record, first carefully remove all dirt and dust
with a record cleaner; use the stylus brush to remove dirt from the
stylus tip.
In cleaning the tip, avoid touching it with your finger or subjecting it to
Stylus tip-—————~— shock; such mistreatment may not only shorten its life but may even
Folnte
de
lecture
dislodge
the
jeweled
tip
itself.
Replacement of styli
A diamond-tipped stylus will usually provide agout 500 to 800 hours of
high fidelity record playback.
A worn stylus, however, will cause distorted or crackling sound
reproduction. You are advised to replace your stylus as frequently as
possible.
Power frequency
Because of its direct-dirve servomotor, your turntable operates per-
fectly on available power frequencies of any area; you need never
undertake frequency changeover.