Sanus BMT1 - Page 12

12
8. Install the wall plate
07
using four washers
08
and lag bolts
09
. Firmly tighten all four lag bolts
09
until they are pulled flush against
the wall plate
07
.
NOTE: Hold the wall plate
07
in place when tightening the first lag bolt
09
to keep the plate from shifting out of place.
CAUTION: Avoid potential personal injury or property damage! All four lag bolts
09
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
07
.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
9. Slide the covers
C
closed on wall plate
07
.
Go to STEP 3 on PAGE 27.
07
C
C
9
09
8
08
07