Sanus DLF118 - Page 12

12
1 2
≤ 5/8 in.
(16 mm)
STEP 2A Attach Wall Plate to Wall Wood Stud Option
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm)
● Minimum horizontal space between lag bolts: 16 in. (406 mm)
15
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge-to-edge stud finder.
2. Position the wall template 15 at your desired height and line up the holes with your stud center line. Level the template and tape in place.
Min.
16 in.
(406 mm)