Sanus LT25 - Page 12

12
1
2
STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option
CAUTION: Avoid potential personal injuries and property damage!
● Mount the wall plate
23
directly onto the concrete surface
● Minimum solid concrete thickness: 8 in. (203 mm)
● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
● Minimum horizontal space between fasteners: 8 in. (203 mm)
1. Position the wall plate
23
on the wall at your desired height. Level the wall plate and mark the six hole locations.
NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com.
2. Drill six pilot holes using a 1/2 in. (13 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
Min.
8 in.
(203 mm)
23
1/2 in.
(13 mm)
3 in. (75 mm)