13
3
4
3. Insert six anchors
24
.
CAUTION: Be sure the anchors
24
are seated flush with the concrete surface.
4. Install the six washers
25
and lag bolts
26
. Tighten all six lag bolts
26
only until the washers
25
are pulled firmly against the wall plate
23
.
CAUTION: Avoid potential personal injury or property damage! All four lag bolts
26
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
23
.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
24
25
26
23
To Next Page
Loading...
