Sanus SLF5 - Level Adjustment; TV Lateral Shift; Removing the TV

21
REMOVING THE TV
To remove your TV from the arm
assembly
20
, disconnect all
cables and then reverse the
procedures in STEP 3-2.
1. Remove the TV from the arm assembly
20
.
2. Remove the cover plates
24
and the four screws
21
from wall plate
16
.
3. Reposition the arm assembly on the wall plate.
4. Reattach the four screws (STEP 3-1) and replace the
cover plates (STEP 3-4).
5. Hang the TV onto the arm assembly following STEP 3-2.
TV LATERAL SHIFT
LEVEL ADJUSTMENT
Adjust the leveling of your TV
by turning the level screw using
hex key
25
.
24
21
16
20
24
25
Level Screw
20
25