Sanus Visionmount MF209 - Installation Steps; Determine TV Mounting Pattern; Attach TV Brackets

6901-002129 <01>
6
1 Select TV Hardware and Mount TV Brackets
1-1 Choose screw length and diameter
1-2 Select the hardware con guration
Hand thread screws into the threaded inserts on
the back of your TV to determine the correct screw
diameter (M4, M6, or M8).
Verify that there are adequate threads to secure the
brackets to the monitor. If you encounter resistance,
stop immediately and contact customer service.
CAUTION: Avoid potential personal injuries
and property damage! Use the shortest screw and
spacer combination to accomodate your needs. Using
hardware that is too long may damage your monitor’s
internal components.
Your TV type will help you determine which hardware con guration to use. Match your type of TV to the suggested
hardware con guration on the next page.
A. Installation option without spacers (TVs with  at backs).
B. Installation option using spacers (TVs with obstructed backs or inset mounting holes).
A B
100 mm
100 mm
200 mm
75 mm
75 mm
200 mm
100 mm
100 mm
200 mm
75 mm
75 mm
200 mm
Before You Begin - Determine Your TV Hole Pattern