48
T
(5) Before suspending the indoor unit, remove the 2
screws on the latch of the air-intake grilles, open
the grilles, and remove them by pushing the claws
of the hinges as shown in Fig. 3-78. Then remove
both side panels sliding them along the unit toward
the front after removing the two screws which fix
them. (Fig. 3-79)
(6) Preparation for suspending the indoor unit. The
suspension method varies depending on whether
the unit is next to the ceiling or not.
(Figs. 3-80 and 3-81)
To Next Page
Loading...
