4. Plug one end of the supplied AC adaptor
into the DC 6V socket, then plug the other
end into a 230- 240V AC wall outlet.
AC 230- 240V
●
●
5.
++
The battery is fully charged approximately 8
hours after the AC adaptor is connected.
More time may be required for charging in
cold temperatures.
When charging is completed, disconnect
the AC adaptor plugs from both the CDP-
150 and the AC outlet.
Cautions on the AC Adaptor
● Use this unit only with the supplied AC
adaptor. Use with other AC adaptors could
damage the unit.
● Do not touch the AC adaptor with wet hands.
Doing so is dangerous, as this could result
in an electrical shock.
● If the AC adaptor is connected when the
batteries are installed, the power supply
automatically switches to the mains source
and the batteries are disconnected.
-9-
To Next Page
Loading...
