i
Program Example:
Program Number
1
2
3
4
5 6
Track Number
5 3
8 1
2 4
Press the P.MODE button tO display “
❑ “. The track number and “ ❑ “ flash
proceed to any of the four following operations: Changing the Program,
Changing the Last Portion of a Program or Deleting the Program.
Changing the Program
Example: To change program 2, track number
3 to track number 6
1.
2.
3.
Press the SET button to display track num-
ber 3 (program number 2).
TRACK NO.
[
/-/ :i
/_/ _/
❑
1
Press the F BACK or F FWD button to
change the track number to 6.
TRACK NO.
[
/-/
/1
/_/
l_# ~
1
Press the SET button. After the change has
been completed, the display will change to
indicate the next program number (track
number 8, program number 3).
TRACK NO.
[
/–/
/:1
)_/ /_/ ❑
1
-18-
in the display. Then
Adding a Program,
Adding a Program
Example: Add track number 9 as program 7
1.
2.
3.
4.
Press the SET button to display “00”.
TRACK NO.
[
1-//-/
/_/ /_/
❑
1
Press the F BACK or F FWD button to
display track number 9.
TRACK NO.
.-
[
l-l /1/
/_/ _/
❑
I
Press the SET button. After the addition is
completed, the display will indicate “00.
TRACK NO.
1
/-/
!-1
/_//_/❑
I
To make further additions, repeat the same
procedure: press the F BACK or F FWD
button to display the track number, then
press the SET button.
To Next Page
Loading...
