14
The guide shows the digital TV channel schedule for the next 7
days.
1. Press the guide button on your remote control.
2. A schedule will appear on the screen.
3. Use the
e
or
d
buttons to move up and down the program list.
Use the
7
or
8
buttons to show the daily program schedule lists.
4. Press the OK button to get more information on the programme
you have selected. The program selected will be highlighted
yellow.
5. To set recording see Timer recording below
- This feature is used when you wish to record a digital channel on
your Hard disk recorder.
- In order to record digital channels you cannot watch another digital
channel when recording.
- Timer recording will switch your TV set to the digital channel at the
preset time until the finish time is reached.
- Whilst timer recording is running you can switch to Analogue TV.
- You can also switch your TV into Standby mode.
✐ If channel has been locked (Parental lock) and you have set timer
record for locked channel it will not record. You have to deacti-
vate parental lock first.
1. Press the Guide button to set recording.
2. Press the RED button to select set recording
3. A Set events screen will appear.
4. Select channel by pressing the
7
or
8
buttons and rotate
through all available channels.
5. Press the
d
button to select Wake-up day box. Enter your day,
month and year by using numeric buttons (0-9). and using the
7
or
8
buttons to move left and right.
6. Press the
d
button to select Wake-up time box. Enter your time
by using numeric buttons (0-9). and using the
7
or
8
buttons to
move left and right.
7. Press the
d
button to select Finish time box. Enter your time by
using numeric buttons (0-9). and using the
7
or
8
buttons to
move left and right the time you wish to finish.
8. Press the
d
button to select Repeat box. Press the
7
or
8
but-
tons to enter No repeat, daily, or weekly. This would be a useful
feature if you have a favourite programme that you dont want to
miss and it is shown on a daily or weekly schedule.
9. Press the OK button to save settings, you can repeat again or
press the RETURN button to go back. Once the OK button is
pressed, the HDD Timer Record menu appears with the preset
data added from the Set Events saved settings.
10. The entered settings can be changed such as the Date/Time/
Duration/ Program. Once the settings have been entered using the
8
button move to Save/ Cancel. Once the seetings have been Saved/
Canceled using the OK button, the Playlist menu appears on
screen to exit press the
Timer REC button.
When you press the info button in digital mode you will be displayed
a window showing all the channels available.
The channel you want info on will be highlighted yellow and will be
viewed on the right side of the displayed window.
Press the
e
or
d
buttons to select current channel information.
Press the Green button to show information on the following pro-
gram.
Press the Blue button to bring up the weekly program guide.
Press
Return on the remote to exit the info window.
From time to time upgrades will become available. When this hap-
pens the following screen appears.
To upgrade press the
OK button and the following screen will
appear.
Press the
OK button to start, this automatically downloads for you.
The following screen appears.
The following screen appears to show that the upgrade is nearly fin-
ished. Once this screen disappears the upgrade is complete.
DIGIT
DIGIT
AL
AL
OPERA
OPERA
TION
TION
Guide
To Next Page
Loading...
