17
■ AV2 setting
In setting menu, to select AV2 press the 8 button and set to Video
or S-Video depending on your external equipment. If you use a VCR
which has S-VHS, you should connect it to AV2 and change the AV2
menu to S-VIDEO.
1. Press the MENU button. Select Setting using the e or d button
press the 8 button to enter.
2. Select AV2 using the e or d button.
3. Press the 7 or 8 button to select which Video or S-Video.
4. Press the MENU button to exit, this automatically stores your
changes.
■ Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time has elapsed.
1. Press the MENU button. Select Setting using the e or d button
press the 8 button to enter.
2. Select Timer using the e or d button and then select OFF Timer
using the e or d buttons.
3. Press the 7 or 8 button to change time.
The time changes in 5 minute steps.The maximum time is 2:00hrs.
If you have set the off timer, a display appears in the corner of the
screen.
✐ If the TV set is switched off by the standby button
4
on the
remote control or by the standby switch
4
on the top of the TV
set the timer settings will be cancelled.
4. Press the MENU button to exit.
■ Alarm Timer setting
The Alarm-timer will sound the alarm for 15 secs, when the selected
time has elapsed.
1. Press the MENU button. Select Setting using the e or d button
press the 8 button to enter and select timer.
2. Select Alarm-Timer using the e or d button.
3. Press the 7 or 8 button to change time.
The time changes in 1 minute steps.The maximum time is 180 mins.
To cancel the alarm, press any button and the display will disappear.
✐ If the TV set is switched off by the standby button
4
on the
remote control or by the standby switch
4
on the top of the TV
set the timer settings will be cancelled.
4. Press the MENU button to exit.
The preset menu can be used to tune new channels, to reorder
channels and their programme positions, and to make fine adjust-
ments to the tuning.
1.Press the Menu button
2. Select Preset using the
e or d. Press the 8 button to enter
● Program sort
This is used to preset a received channel in any desired programme
position.
Use the ed or 78 buttons on your remote control to move to
selected program numbers. The number you have selected will be
highlihted yellow.
To move a program number press the Green button on your remote
and use the ed or 78 buttons to place it where you want it
moved to.
To delete a program select the number and press the Red button on
your remote to Delete it
■ Program Name.
With this feature individual channels may be numbered or renamed
by using the 7 or 8 buttons. Using the 5 or 6 buttons. Press
the 8 button, the first character space will be highlighted. Press the
5 or 6 buttons until the number or first letter you require
appears (0-9, A-Z, a-z, ?, !, -, +). Press the 8 button to select the
second character.
You can assign 7 characters of information. When finished press the
8 button repeatedly until no character is highlighted.
MENU OPERA
MENU OPERA
TION
TION
Setting menu
To Next Page
Loading...
