23
HDD OPERATION
Enter HDD Setup menu using the HDD menu button.Using the e or
dbuttons to select Timer record. The timer record function will start
and stop recording the program at the selected time and data set.
To select time and date for the program required recording press the
8 button to open the recording menu
Using the e or d buttons select the ID number 1-2-3 for the
program postion to be indicated. Once this has been choosen press
the OK button to access INPUT mode.
In Input mode use the e or d buttons or the numeric (0-9) buttons
on the remote to change the Date/ Time/ Program.....
To move from one input position to another use the 7 or 8 buttons.
The record mode can be changed from HQ (high quality), to short/
long play etc. To choose the desired mode use the e or d buttons.
The HDD record function can record programs from Analogue/ digital
and AV1-4 mode.
When entering in the program number for recording the modes are
selected by letters. Analogue is indicated by A, Digital is indicated by
D and AV mode is indicated by AV, these can be selected by using
the e or d buttons.
Use the e or d buttons or numberic (0-9) buttons to select the
program number.
Once all the settings have been entered use the
8 button to move
to Save/ Cancel. Press OK button to Save or cancel the settings
entered. To exit the timer list press the HDD menu button on the
remote.
If there has been a duplicate record entered or an error has occured
a message will appear on can either be ignored or can be entered
again.
To directly access the Timer recording menu press the Timer REC
button. To Delete the timer record settings press Clear.
Record Quality allows you to select a default recording mode, this
will determine the record quality and the total HDD playing time.
Press thee or d buttons to select record quality from HQ/ SP/ LP/
EP/ SLP. Press the OK button the save the settings
This function selects a default Replay mode. Once the Always
Replay function is preset to ON it is aways active and the HDD
records the signal in a buffer area once the set is powered on.Use
the e or d buttons to select Always Replay, use the 8 button to
access ON/ OFF. Press OK button to confirm your selection
When Always replay is active the REPLAY button does not function.
✐ The maximun time allowed for Replay playback is 2 hours.
HDD Setup
Move
HDD MENU
Exit
Set Time
Format HDD
Scandisk HDD
Timer Record
Record Quality
Always Replay
ID Date Start Duration Mode Program
Move Edit Clear Exit
OK
CLEAR TIMER REC
1 05/04/ 06 19:00:00 02:00:00 HQ A 04 CH
2 08/04/ 06 12:30:00 00:30: 00 LP D 04 CH
3 10/04/ 06 22:00:00 02:00:00 SP AV 3
4
5
6
7
8
ID Date Start Duration Mode Program
Move Edit Clear Exit
OK CLEAR TIMER REC
1 05/04/ 06 19:00:00 02:00:00 HQ A 04 CH
2 08/04/ 06 12:30:00 00:30: 00 LP D 04 CH
3 10/04/ 06 22:00:00 02:00:00 SP AV 3
4
5
6
7
8
ID Date Start Duration Mode Program
Move Enter
OK
SAVE
Cancel
1 05/04/ 06 19:00:00 02:00:00 HQ A 04 CH
ID Date Start Duration Mode Program
Move Edit Clear Exit
OK CLEAR TIMER REC
SAVE
Cancel
1 05/04/ 06 19:00:00 02:00:00 HQ A 04 CH
Overlapped entry. Try again
On
Off
To Next Page
Loading...
