How to fix a tripped temperature fuse in Sanyo CG1411 Air Conditioner?
If the temperature fuse or temperature limiting switch has tripped in your Sanyo Air Conditioner, you should replace the temperature fuse or the temperature limiting switch.
What to do if Sanyo CG1411 Air Conditioner displays 'G G G G' due to defective thermistor 1?
If your Sanyo Air Conditioner shows a 'G G G G' failure on the outdoor unit PCB due to a defective thermistor 1, you can either replace Thermistor 1 or replace the outdoor unit PCB.
What to do if Sanyo CG1411 Air Conditioner displays 'G G G G' due to defective thermistor 2?
If your Sanyo Air Conditioner displays a 'G G G G' failure on the outdoor unit PCB because of a defective thermistor 2, you can either replace Thermistor 2 or replace the outdoor unit PCB.
How to resolve 'G G G G' error on Sanyo Air Conditioner caused by flame detection?
If the Sanyo Air Conditioner displays a 'G G G G' failure on the outdoor unit PCB due to erroneous flame detection, you should replace the outdoor unit PCB.
What to do if Sanyo Air Conditioner shows 'G G G G' failure due to bypass valve issues?
If your Sanyo Air Conditioner displays a 'G G G G' failure on the outdoor unit PCB due to bypass valve failure or drop-out of thermistor 2, you can replace the ON/OFF valve 2 (coil) or replace the outdoor unit PCB.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Weight (Indoor Unit) | 9 kg |
| Type | Split |
| Noise Level (Outdoor) | 52 dB |
| Operating Temperature (Cooling) | 18-43 °C |
| Operating Temperature (Heating) | 24 °C |
| Dimensions (Outdoor Unit) | 540 x 260 mm |
To Next Page
