To Next PageTo Next PageWhy aren't the outdoor fan and compressor running on my Sanyo CL1852 Air Conditioner?
If the room temperature sensor in your Sanyo Air Conditioner's remote control unit is open (no continuity), neither the outdoor fan nor the compressor will run.
What happens if the coil temperature sensor is shorted in my Sanyo CL1852?
If the indoor (heat exchanger) coil temperature sensor in your Sanyo Air Conditioner is shorted, the freeze prevention feature will not operate when dehumidified water is frozen on the indoor coil.
General| Brand | Sanyo |
|---|---|
| Model | CL1852 |
| Category | Air Conditioner |
| Language | English |
Safety precautions for electrical wiring, emphasizing qualified personnel.
Guidelines for safely moving indoor and outdoor units.
Installation advice for various locations like rooms, moist areas, high winds, and snowy areas.
Procedures and safety for connecting refrigerant lines.
Safety measures to follow during unit servicing and maintenance.
Detailed specifications for indoor and outdoor units.
Lists key components and their specifications for the indoor unit.
Lists key components and their specifications for the outdoor unit.
Details of other components specific to the indoor unit.
Details of other components specific to the outdoor unit.
Dimensional drawings and measurements for the XS1852 indoor unit.
Dimensional drawings and measurements for the C1852/CL1852 outdoor units.
Charts illustrating operating current characteristics under various conditions.
Guidelines for refrigerant tubing length and related specifications.
Criteria for choosing the optimal indoor unit installation location.
Criteria for choosing the optimal outdoor unit installation location.
Guidance on using baffle plates for CL1852 outdoor units in windy conditions.
General precautions and guidelines for electrical wiring installation.
Electrical wiring diagram for the XS1852 indoor unit.
Electrical wiring diagram for the C1852 outdoor unit.
Electrical wiring diagram for the CL1852 outdoor unit.
How the thermostat manages room temperature by controlling the compressor.
System mechanism to prevent indoor heat exchange coil freezing.
Operation of the drain pump based on compressor or float switch.
Low ambient fan speed control to protect the compressor.
Initial checks and procedures for diagnosing and resolving unit problems.
Symptoms and causes of defective indoor coil or room sensors.
Table showing the operation of key electrical components under various modes.
Methods for measuring insulation resistance and checking electrical parts.
Procedures for checking various protective devices like thermal protectors.
Detailed steps for checking components like transformers, motors, and capacitors.
Graphs showing thermistor resistance versus temperature for diagnostics.
