Need help?Do you have a question about the Sanyo CL2432 and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | CL2432 |
| Category | Air Conditioner |
| Language | English |
Precautions for electrical wiring to prevent shock.
Guidelines for safely moving indoor and outdoor units.
Installation considerations for various locations and conditions.
Procedures for connecting refrigerant tubing safely.
Safety steps before performing service or repairs.
Detailed specifications for the indoor and outdoor units.
Specifications of key components within the indoor unit.
Specifications of key components within the outdoor unit.
Other component specifications for the indoor unit.
Other component specifications for the outdoor unit.
Detailed dimensions for the indoor unit.
Detailed dimensions for the outdoor unit.
Charts showing operating current vs. temperatures for different models.
Charts for discharge and suction pressures vs. temperatures.
Tables detailing cooling capacity under various conditions.
Importance of insulating refrigerant tubing to prevent heat loss and condensation.
Guidelines for refrigerant tubing length and elevation difference.
Recommendations and warnings for choosing a location for the indoor unit.
Guidelines for selecting a location for the outdoor unit.
Spacing requirements for multiple indoor units.
General safety and procedural guidelines for electrical wiring.
Recommended wire length and diameter for power supply.
Procedure for connecting refrigerant tubing to the outdoor unit.
Wiring diagram for the indoor unit.
Wiring diagram for the C2432 outdoor unit.
Schematic diagram for the C2432 outdoor unit.
Wiring diagram for the CL2432 outdoor unit.
Schematic diagram for the CL2432 outdoor unit.
How the unit controls room temperature by cycling the compressor.
How the unit operates in dry mode to remove moisture.
How the unit prevents the indoor coil from freezing.
How outdoor fan speed is adjusted based on temperature for different models.
Basic checks for power supply, wiring, and connections before troubleshooting.
Steps for diagnosing issues when the unit does not operate or circuit breaker trips.
Procedures for checking specific components like switches, protectors, and transformers.
Steps to check auxiliary relays and fuses on the PCB.
Steps to diagnose why the outdoor unit is not running.
Checking the compressor contactor and PCB for issues.
Diagnosing issues with the indoor fan or flap motor not running.
Diagnosing outdoor fan issues and speed control problems.
Diagnosing compressor and CL2432 outdoor fan non-operation.
Diagnosing issues with poor or excessive cooling.
Identifying problems caused by defective indoor or room temperature sensors.
Measuring insulation resistance of power supply wires and unit components.
Checking continuity of protective devices like thermal protectors.
Measuring coil resistance of transformers, motors, and capacitors.
Checking fuse continuity and replacement procedure.
How to assign addresses for multiple indoor units and their remote controls.
To Next Page
