iii
Search (forward/reverse)
If the
➤>/>Mor144/+< SKIP/SEARCH button is pressed during play,
theplayerwill search athighspeed intheforward orreversedirection
while the button is being pressed. When the button is released,
normal play will continue.
Introscan
Press the INTRO button to play the first 10 seconds of each track.
“INTRO” appears on the display,
Press the INTRO button again to return to normal play,
If the INTRO button is pressed during normal play, introscan will
start with the next track on the disc.
Random play
Press the RANDOM button to begin random play. The player will
automatically select and play tracks on the disc at random. “RAN-
DOM” appears on the display.
If the RANDOM button is pressed during random play, the player
will select the next random track.
Random introscan play
Press the RANDOM button, then thelNTRO button, toplaythefirst 10
seconds of each track at random.
Repeat play
Press the REPEAT button during play. The player will play all tracks,
all the programmed tracks or all the random play tracks repeatedly.
“REPEAT” appears on the display.
To cancel repeat play, press the REPEAT button again. “REPEAT”
disappears.
PROGRAMMED PLAY
Up to 24 selections on a disc can be programmed for play in any
order.
To begin the programming procedure, select “CD” function first.
The tracks are programmed in the stop mode.
The same track can be programmed more than once.
Example:
To programme tracks 5, 2, 6 and 10
1
2
3
4,
5.
6.
7.
Press the CD MEMORY button.
&
Select track 5 by pressing the >/~ SKIP/SEARCH button.
I
1
MmA5 Pr. 1
I
Press the CD MEMORY button. “PROG. ” remains lit.
Select track 2 by pressing the w/44 SKIP/SEARCH button.
kmA2 Pr. 2
I
Press the CD MEMORY button. “PROG. ” remains lit.
The remaining tracks are programmed in the same way.
Press the PLAY/PAUSE button to start play,
k5@--!u
When all programmed selections have played, the player stops
automatically. The total programmed time appears.
- The programme contents are retained in memory.
Anyattemptto programme more than 24selectionswiil result in
“FULL” being displayed and discontinuation of the program-
ming.
The programme is cleared in the following cases:
When the STOP button is pressed in the stop mode
When the EDIT button is pressed in the stop mode
When the OPEN/CLOSE button is pressed
Checking the programme
Each time the CD MEMORY button is pressed in the stop mode, the
programmed details sequentially appear on the display.
Changing a programme
To add a new selection to a programme:
1. Inthestop mode, press the
CD MEMORY button repeatedly until
if.. .. ...
“ is displayed.
2. Select a track number.
3. Press the CD MEMORY button.
To change a selection:
1. In the stop mode, press the CD MEMORY button repeatedly until
the selection to be replaced is displayed.
2. Select a track number.
3. Press the CD MEMORY button.
Note:
Programmed details cannot be partially deleted or inserted.
-6-
To Next Page
Loading...
