- 31 -- 30 -
SCHEMATIC DIAGRAM (TUNER)
This is a basic schematic diagram.
PRODUCT SAFETY
NOTICE
Each precaution in this
manual should be
followed during servicing.
Components identified
with the IEC symbol
!
!!
in
the parts list and the
schematic diagram
designated components
in which safety can be of
special significance.
When replacing a
component identified by
!
!!
, use only the
replacement parts
designated, or parts with
the same ratings of
resistance, wattage or
voltage that are
designated in the parts
list in this manual.
Leakage-current or
resistance
measurements must be
made to determine that
exposed parts are
acceptably insulated from
the supply circuit before
returning the product to
the customer.
To Next Page
Loading...
