Sanyo DC-X8CT - Schematic Diagram (Tape Deck)

- 59 -- 58 -
PRODUCT SAFETY NOTICE
Each precaution in this manual should
be followed during servicing.
Components identified with the IEC
symbol
!
!!
in the parts list and the
schematic diagram designated
components in which safety can be
of special significance. When
replacing a component identified by
!
!!
, use only the replacement parts
designated, or parts with the same
ratings of resistance, wattage or
voltage that are designated in the
parts list in this manual. Leakage-
current or resistance measurements
must be made to determine that
exposed parts are acceptably
insulated from the supply circuit
before returning the product to the
customer.
SCHEMATIC DIAGRAM (TAPE DECK)
This is a basic schematic diagram.