— 12 —
STAND REMOVAL
Note: Position TV face down on a padded or cush-
ioned surface to protect the screen and finish.
Remove 4 screws to take the stand off.
MECHANICAL DISASSEMBLY
TUNER
VHF
UHF
CATV
CABINET BACK REMOVAL
Remove 6 screws (B : 4X14) to take the cabinet back
(C/B) off.
Note: The cabinet back can be removed without
removing the stand.
A
B
B
B
A
A
B
B
B
B
A
STD
C/B
B
CABINET BOTTOM REMOVAL
Press 2 hooks inside to remove the cabinet bottom
(C/BTM).
C
C
C
C
D
C
C
M/BRKT
SH/B
Hook Hook
C/BTM
SHIELD BACK REMOVAL
Remove 6 screws (C: 3X10) to remove the shield back
(SH/B).
MOUNTING BRACKET REMOVAL
Remove a screw (D: 3X10) to remove the mounting
bracket (M/BRKT).
CAUTION: This LCD TV uses several different kinds of
screws. Using the correct screw is neces-
sary to prevent damage. Lead wires must
be redressed to their previous locations
after servicing.
To Next Page
Loading...
Need help?
General
