Sanyo DP26670 - System Operation and Settings; TV Operation, Menu Navigation, and Features

1. REMOVAL OF MECHANICAL PARTS
1-3: BACK CABINET ASS'Y (Refer to Fig. 1-3)
AND P.C. BOARDS
1. Remove the 9 screws (1)
2. Remove the Back Cabinet Ass'y in the direction of arrow.
CAUTION
Be careful not to remove the LVDS cable forcibly, because
the LVDS cable may be damaged.
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1.
Remove the 2 screws (1).
2.
Remove the Stand Ass'y in the direction of arrow.
DISASSEMBLY INSTRUCTIONS
(1)
(
1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
Fig. 1
-
1
Stand Ass'y
B1-1
1-2: COVER INVERTER and COVER LVDS
(Refer to Fig. 1-2)
1. Remove the screw (1).
2. Remove the Cover Inverter in the direction of arrow (A)
1-4: LCD BLOCK (Refer to Fig. 1-4)
3.
Disconnect the following connector:
(CP3906).
4.
Remove the screw (2).
1.
Remove the 2 screws (1).
5.
Remove the Cover LVDS in the direction of arrow (B)
2.
Remove the 3 screws (2).
6.
Disconnect the following connector:
(CP2804).
3.
Remove the Angle-Hinge in the direction of arrow (A)
4. Remove the LCD Block in the direction of arrow (B).
(2)
(
1)
(1)
(2)
(2)
(A)
(B)
Angle Hinge
F
ig. 1-4
LCD Block
Fig. 1-3
Fig. 1
-
1
(2)
(
1)
Cover LVDS
(B)
(A)
Cover Inverter
Fig. 1-2
B1-1