Need help?Do you have a question about the Sanyo DP32671 and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | DP32671 |
| Category | TV DVD Combo |
| Language | English |
Ensure all grounding screws are connected to prevent damage to main board, power supply, or LCD panel.
Procedure for safely removing the DVD deck, including short-circuiting the laser.
Procedure for installing the DVD deck, including removing short-circuit solder.
Essential steps and precautions before starting service procedures.
Warning about the laser system and safe usage of the product.
Identifies the location of rating sheets and safety cautions on the unit.
Notices on electric shock, part usage, LCD panel, and reassembly.
Guidelines for ordering replacement parts, including necessary information.
Comprehensive list of safety guidelines for operating and maintaining the apparatus.
Illustrates antenna grounding according to the National Electrical Code for safety.
Advice on preventing and managing condensation for optimal player performance.
Precautions for handling the LCD panel to prevent damage and injury.
Step-by-step guide to safely remove a disc when the unit has no power.
Method for ejecting a disc in emergency situations, with cautions for normal use.
Info on identifying PbF PCBs and cautions for using Pb-free solder.
Recommended lead-free solder composition for servicing.
Instructions for configuring and resetting the Hotel Mode features.
Details on the TV system's LCD size, pixels, view range, and color system.
Information on DVD system, disc compatibility, drive, and search speeds.
Details on broadcasting system, tuner, and frequency coverage.
Info on input/output levels, S/N ratio, and resolutions for various signals.
Details on power source, consumption, and protection features.
Info on safety regulations, radiation, laser, and operating temperature.
Specifies the operating humidity requirements for the unit.
Details regarding clock, sleep timer, and on/off timer functions.
Information on remote control format, keys, and functions.
Lists various features including auto shut off, auto search, hotel mode, and comb filter.
Details on picture settings for TV and PC modes, including brightness, contrast, and color.
Information on audio settings like MTS, equalizer, and stable sound.
Specifications for tuning, CH program, and air/cable settings.
Settings for menu language, dynamic backlight, gamma, and signal meter.
Lists supported resolutions and refresh rates for PC monitor input.
Details supported resolutions and refresh rates for HDMI input.
Lists supported resolutions for DVI to HDMI input.
Supported resolutions and refresh rates for component input.
List of included accessories such as manuals, remote control, and antennas.
Details on connector types and pin assignments for various interfaces.
Physical dimensions and weight of the unit.
Details on carton dimensions, gift box, and drop test requirements.
Info on materials used and environmental compliance like Pb-free and Rohs.
General instructions for disassembling mechanical parts and PCBs.
Steps for removing the back cabinet assembly.
Procedure for removing the DVD MT PCB and loader unit.
Steps for removing the main, side jack, and operation PCBs.
Instructions for removing the power PCB.
Steps for removing the LED panel and remocon PCB.
Specific instructions for disassembling DVD deck components.
Steps for removing the traverse and loader sub assemblies.
Instructions for removing feed rack, gear motor, and related parts.
Steps for removing shutter, roller, gear, and washer assemblies.
Detailed instructions for removing various gear and loading motor components.
Guidelines for correctly handling and installing FFC wires.
Procedures for removing and installing flat package ICs.
Steps for soldering and confirming the installation of flat package ICs.
Table detailing service modes, keys, time, and operations.
Procedure to check sum, power on hours, and MICON version.
Steps to ensure correct data settings when replacing the memory IC.
General steps and tools required for electrical adjustments.
Method for accessing and performing on-screen display adjustments.
Procedure for adjusting white balance using a gray scale pattern.
Steps to adjust brightness centering across various input modes.
Procedure for setting contrast to maximum across different input modes.
Steps to adjust contrast centering for various input modes.
Procedure to set contrast to level 40 across different input modes.
Wiring connection guide for electrical adjustment components.
Overview of the main PCB's functional blocks and connections.
Functional overview of the Jack PCB and its connections.
Top and bottom side views of the DVD MT printed circuit board.
Top and bottom side views of the Side Jack printed circuit board.
Top and bottom side views of the Main printed circuit board.
Solder side views of the Power/Remocon/Operation PCB.
Solder side views of Power/Remocon/Operation, Loading Motor, and Chip Mounted PCBs.
Detailed schematic for the MPEG, MICON, and DSP sections on the DVD MT PCB.
Schematic diagram for memory and SD card interfaces on the DVD MT PCB.
Schematic for the loader and motor drive circuits on the DVD MT PCB.
Schematic for video and audio input/output circuits on the DVD MT PCB.
Schematic diagram for the flash memory on the Main PCB.
Schematic for the DDR2 memory interface on the Main PCB.
Schematic diagram detailing the HDMI interface connections and components.
Schematic for the LVDS interface connecting to the LCD panel.
Schematic showing the MICON interface and its connections.
Schematic illustrating the power supply for the scaler IC.
Schematic diagram for the TV tuner circuit.
Schematic for the scaler's video and audio processing circuits.
Schematic detailing the various audio/video jack connections.
Schematic showing various voltage regulator circuits on the Main PCB.
Schematic of regulator circuits for the T-CON board.
Schematic of the main power supply circuits on the Power PCB.
Schematic for the backlight inverter circuits on the Power PCB.
Schematic for operation buttons and remote control receiver.
Schematic detailing the Jack2 connector and related components.
Schematic for the digital audio amplifier IC and speaker outputs.
Schematic for the loading motor control circuits.
Diagram showing how major modules and PCBs are interconnected.
Displays waveform examples for FLASH, SCALER, JACK, and MPEG signals.
Displays waveform examples for MPEG, MICON, DSP, and VIDEO/AUDIO signals.
Diagram showing the assembly of major mechanical parts.
Illustration of the unit's packing configuration.
Exploded view of the DVD deck with part numbers and grease application points.
List of mechanical parts with reference numbers, part numbers, and descriptions.
List of replacement parts specifically for the DVD deck.
List of resistors with reference numbers, part numbers, and values.
Continuation of the resistor parts list with reference numbers and values.
Further continuation of the resistor parts list with reference numbers and values.
List of capacitors with reference numbers, part numbers, and values.
Continuation of the capacitor parts list with reference numbers and values.
Further continuation of the capacitor parts list with reference numbers and values.
List of diodes with reference numbers, part numbers, and types.
List of integrated circuits with reference numbers, part numbers, and functions.
Lists transistors, coils, transformers, switches, and PCB assemblies.
Lists miscellaneous items like terminal pins, crystals, and PCB assemblies.
Lists additional miscellaneous items like terminal pins, crystals, and PCB assemblies.
To Next Page
