Sanyo DP32671 - DISASSEMBLY INSTRUCTIONS (CONTINUED); Power PCB Removal Procedure; LED Panel;Remocon PCB Removal

1-4: POWER PCB
(
Refer to Fi
g
. 1-4
)
1. Remove the 6 screws
(
1
)
2. Disconnect the following connectors:
(CP7001, CP7002, CP7003 and CP7004).
3. Remove the Power PCB in the direction of arrow
.
1-5: LED PANEL/REMOCON PCB
(
Refer to Fi
g
. 1-5
)
1
Remove the 4 screws (1)
DISASSEMBLY INSTRUCTION
S
Fig. 1-3
(1)
(1)
(1)
Power PCB
(1)
(1)
(1)
B1-2
1. Remove the 4 screws
(
1
)
.
2. Remove the An
g
le Hin
g
in the direction of arrow
(
A
).
3. Remove the LED Panel in the direction of arrow
(
B
).
4. Remove the Remocon PCB in the direction of arrow
(
C
).
Fig. 1-5
(1)
(A)
(B)
Angle Hing
LED Panel
Remocon PCB
(C)
(1) (1)
(1)
B1-2