Sanyo DP26670 - Page 30

2-2: BRIGHTNESS CENT 2-3: CONTRAST MAX
1. Place the set in Aging Test for more than 15 minutes. 1. Place the set in Aging Test for more than 15 minutes.
2. Receive the color bar pattern. (RF Input) 2. Receive the color bar pattern. (RF Input)
3. Using the remote control, set the brightness and 3. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
4.
Activate the adjustment mode display of Fig. 1-1 and
4.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (32) on the remote control to press the channel button (51) on the remote control to
select "BRIGHTNESS CENT". select "CONTRAST MAX".
5. Press the LEFT/RIGHT button on the remote control 5. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "126". until the contrast step No. becomes "154".
6. Check if the picture is normal. 6. Check if the picture is normal.
7. Receive the color bar pattern. (VIDEO Input) 7. Receive the color bar pattern. (VIDEO Input)
8. Using the remote control, set the brightness and 8. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
9. Press the INPUT SELECT button on the remote 9. Press the INPUT SELECT button on the remote
control to set to the AV mode. control to set to the AV mode.
Activate the adjustment mode display of Fig. 1-1 and
10.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (32) on the remote control to press the channel button (51) on the remote control to
select "BRIGHTNESS CENT". select "CONTRAST MAX".
Press the LEFT/RIGHT button on the remote control 11. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "127". until the contrast step No. becomes "157".
Check if the picture is normal. 12. Check if the picture is normal.
Receive the color bar pattern. (S-VIDEO Input) 13. Receive the color bar pattern. (S-VIDEO Input)
Using the remote control, set the brightness and 14. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
12.
13.
ELECTRICAL ADJUSTMENTS
11.
14.
10.
D-2
co t ast to o a pos t o
co t ast to o a pos t o
Press the INPUT SELECT button on the remote 15. Press the INPUT SELECT button on the remote
control to set to the AV(Y/C) mode. Then perform the control to set to the AV(Y/C) mode. Then perform the
above adjustments 10~12. above adjustments 10~12.
Playback the DVD(480i) disc. (COMPONENT Input) 16. Playback the DVD(480i) disc. (COMPONENT Input)
Using the remote control, set the brightness and 17. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
Press the INPUT SELECT button on the remote 18. Press the INPUT SELECT button on the remote
control to set to the COMPONENT mode. control to set to the COMPONENT mode.
Activate the adjustment mode display of Fig. 1-1 and
19.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (32) on the remote control to press the channel button (51) on the remote control to
select "BRIGHTNESS CENT". select "CONTRAST MAX".
Press the LEFT/RIGHT button on the remote control 20. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "124". until the contrast step No. becomes "153".
Check if the picture is normal. 21. Check if the picture is normal.
Playback the DVD(480i) disc. (HDMI Input) 22. Playback the DVD(480i) disc. (HDMI Input)
Using the remote control, set the brightness and 23. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
Press the INPUT SELECT button on the remote 24. Press the INPUT SELECT button on the remote
control to set to the HDMI mode. control to set to the HDMI mode.
Activate the adjustment mode display of Fig. 1-1 and
25.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (32) on the remote control to press the channel button (51) on the remote control to
select "BRIGHTNESS CENT". select "CONTRAST MAX".
Press the LEFT/RIGHT button on the remote control 26. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "128". until the contrast step No. becomes "127".
Check if the picture is normal. 27. Check if the picture is normal.
Playback the DVD(480i) disc. 28. Playback the DVD(480i) disc.
Press the INPUT SELECT button on the remote 29. Press the INPUT SELECT button on the remote
control to set to the DVD mode. control to set to the DVD mode.
Using the remote control, set the brightness and contrast 30. Using the remote control, set the brightness and
to normal position. contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
31.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (32) on the remote control to press the channel button (51) on the remote control to
select "BRIGHTNESS CENT". select "CONTRAST MAX".
Press the LEFT/RIGHT button on the remote control until 32. Press the LEFT/RIGHT button on the remote control
the contrast step No. becomes "127". until the contrast step No. becomes "153".
Check if the picture is normal. 33. Check if the picture is normal.
28.
29.
25.
26.
18.
19.
20.
21.
15.
16.
17.
31.
32.
33.
30.
22.
23.
24.
27.
D-2