Sanyo DP26671 - Connecting External Equipment; Connecting to VCR and DVD Player; Connecting to Camcorders and Game Consoles

2-4: CONTRAST CENTER
2-5: CONTRAST 40
1. Place the set in Aging Test for more than 15 minutes. 1. Place the set in Aging Test for more than 15 minutes.
2. Receive the color bar pattern. (RF Input) 2. Receive the color bar pattern. (RF Input)
3. Using the remote control, set the brightness and 3. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
4.
Activate the adjustment mode display of Fig. 1-1 and
4.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
5. Press the LEFT/RIGHT button on the remote control 5. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "117". until the contrast step No. becomes "143".
6. Check if the picture is normal. 6. Check if the picture is normal.
7. Receive the color bar pattern. (VIDEO Input) 7. Receive the color bar pattern. (VIDEO Input)
8. Using the remote control, set the brightness and 8. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
9. Press the INPUT SELECT button on the remote control 9. Press the INPUT SELECT button on the remote control
to set to the AV mode. to set to the AV mode.
Activate the adjustment mode display of Fig. 1-1 and
10.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control 11. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "101". until the contrast step No. becomes "125".
Check if the picture is normal. 12. Check if the picture is normal.
Receive the color bar pattern. (COMPONENT Input) 13. Receive the color bar pattern. (COMPONENT Input)
Using the remote control, set the brightness and 14. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
10.
11.
ELECTRICAL ADJUSTMENTS
12.
13.
14.
D-3
contrast to normal position.
contrast to normal position.
Press the INPUT SELECT button on the remote control 15. Press the INPUT SELECT button on the remote control
to set to the COMPONENT mode. to set to the COMPONENT mode.
Activate the adjustment mode display of Fig. 1-1 and
16.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control 17. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "104". until the contrast step No. becomes "129".
Check if the picture is normal. 18. Check if the picture is normal.
Receive the color bar pattern. (HDMI Input) 19. Receive the color bar pattern. (HDMI Input)
Using the remote control, set the brightness and 20. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
Press the INPUT SELECT button on the remote control 21. Press the INPUT SELECT button on the remote control
to set to the HDMI mode. to set to the HDMI mode.
Activate the adjustment mode display of Fig. 1-1 and
22.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control 23. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "107". until the contrast step No. becomes "132".
Check if the picture is normal. 24. Check if the picture is normal.
Playback the DVD(480i) disc. 25. Playback the DVD(480i) disc.
Press the INPUT SELECT button on the remote control Press the INPUT SELECT button on the remote control
to set to the DVD mode. to set to the DVD mode.
Using the remote control, set the brightness and 26. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
27.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control 28. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "99". until the contrast step No. becomes "128".
Check if the picture is normal. 29. Check if the picture is normal.
16.
17.
18.
20.
23.
24.
25.
26.
27.
22.
15.
19.
21.
28.
29.
D-3