EasyManua.ls Logo

Sanyo DSR-3506 - Alarm Thumbnail Search; Time;Date Search

Sanyo DSR-3506
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SEARCHING FOR RECORDED VIDEO5
28 English
OPERATION
z When playback is performed after an alarm search, the
frame at the start and end of each alarm recording will
be paused.
Press the appropriate [ALARM] button to play the
previous or next alarm recording.
z You can use the front-panel buttons, the shuttle dial,
and the jog dial to perform operations such as pause
and fast-forward.
Use the following procedure to display all of the alarm
recordings stored in the alarm recording area as
thumbnails list.
1 Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH>
screen is displayed.
2 Turn the jog dial to select “ALARM
THUMBNAIL SEARCH”, and then turn
the shuttle dial clockwise.
The nine most-recent alarm recordings are displayed.
An alarm number is indicated together with each alarm
recording, and the number of the currently selected
recording will flash.
3 Turn the jog dial to move the cursor and
select the alarm recording for playback.
The alarm number for the selected recording will start to
flash.
z To display the next or previous recording
Turn the jog dial clockwise or counter-clockwise
accordingly.
z To leave search mode
Press the [SEARCH] button. SEARCH indicator turns
off.
4 Turn the shuttle dial clockwise.
The selected recording is played back in full screen mode.
z In the same way as for alarm searching, playback is
only possible within each individual alarm recording.
Press the appropriate [ALARM] button to play the
previous or next recording.
z You can use the front-panel buttons, the shuttle dial,
and the jog dial to perform operations such as pause
and fast-forward.
Use the following procedure to play a recording from the
normal recording area (i.e., a normal recording or timer
recording) or alarm recording area by specifying its date
and time.
1 Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH>
screen is displayed.
2 Turn the jog dial to select “TIME/DATE
SEARCH”.
Alarm thumbnail search
SEARCH
0016 0015 0014
0013 0012
0010 0009 0008
0011
0011
0011
Time/date search
SEARCH
e00_l8hbe_us_7.book Page 28 Friday, April 16, 2004 1:42 PM

Table of Contents

Other manuals for Sanyo DSR-3506

Related product manuals