Sanyo DSR-3506 - Setting the Period and Monitors for Automatic Screen Selection

SCREEN SET5
88 English
SETTINGS
5 Turn the jog dial to set “01”, and then
turn the shuttle dial clockwise.
“06” changes to “01” and vice versa.
Turn the shuttle dial counter-clockwise to return to the
<MULTI 6 POSITION SET MENU> screen.
z To confirm the modified screen positions, move the
cursor to “CHECK THE SCREEN” and then turn the
shuttle dial clockwise. (→Step 7, P.87)
6 Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
Use the following procedure to scroll through video from all
cameras using a specified period.
A switching time for automatic selection can only be set for
full screen and quad display.
Example:
Automatic switching of a full screen every 5 seconds.
1 Press the [MENU] button and turn the
jog dial to select “4. SCREEN SET”, and
then turn the shuttle dial clockwise.
The <SCREEN SET> screen is displayed.The cursor
moves to “1. MULTI SCREEN”.
2 Turn the jog dial to move the cursor to
“FULL” or “QUAD” from “2. SEQUENCE
SET”, and then turn the shuttle dial
clockwise.
“1S” flashes for “FULL”.
3 Turn the jog dial to set change the
period to “5S”, and then turn the shuttle
dial clockwise.
Automatic selection is set to a period of 5 seconds.
z Use “QUAD” instead of “FULL” to set a period for
automatic quad selection.
z The switching period can be set anywhere between 1
and 30 seconds.
EXIT
Setting the period and monitors for
automatic screen selection
MENU
e00_l8hbe_us_7.book Page 88 Friday, April 16, 2004 1:42 PM