English 95
7 INITIALIZED RECORD
Use the following procedure to display the eight most
recent entries in the initialization and re-recording log for
the hard disk.
1 Press the [MENU] button and turn the
jog dial to select “6. INITIALIZED
RECORD”, and then turn the shuttle dial
clockwise.
The <INITIALIZED RECORD> screen is displayed.
(1) DATE/TIME
Displays the date and time of the operation.
(2) AREA
Displays the area on which the operation was
performed.
(3) Operation class
Displays the operation performed as either of the
following:
zINITIALIZED
zAREA RESET
z “INITIALIZED” is displayed when recording areas have
been changed.
2 Press the [EXIT] button.
The display returns to the normal screen.
Main menu
[EXIT] button
Jog dial
[MENU] button
Shuttle dial
MENU
(1) (2) (3)
EXIT
e00_l8hbe_us_7.book Page 95 Friday, April 16, 2004 1:42 PM
To Next Page
Loading...
