Sanyo DSR-3506 - Screen Set; Setting Quad and Multi 6 Display; Setting Quad Positions

86 English
SETTINGS
5 SCREEN SET
Use the following procedure to change the display
positions for cameras in quad and multi 6 screens.
z Each camera can only be displayed in one position on
any screen.
Example:
Displaying Camera No. 05 in quad position 01
1 Press the [MENU] button and turn the
jog dial to select to “4. SCREEN SET”,
and then turn the shuttle dial clockwise.
The <SCREEN SET> screen is displayed.The cursor
moves to “1. MULTI SCREEN”.
2 Turn the shuttle dial clockwise.
“NORMAL” flashes for “1. MULTI SCREEN”.
3 Turn the jog dial to select “CHANGE”,
and then turn the shuttle dial clockwise.
The cursor moves to “QUAD POSITION SET”.
[Settings] ( indicates the default setting)
4 Turn the shuttle dial clockwise.
The <QUAD POSITION SET MENU> screen is displayed
with the cursor positioned on “01”.
Main Menu
[EXIT] button
Jog dial
[MENU] button
Shuttle dial
Setting quad and multi 6 display
Setting quad positions
0605
0201
0201
0403
05
0201
04
0201
03
06
MENU
Setting Description
NORMAL The display sequence for cameras is not changed.
CHANGE The display sequence for cameras is changed.
e00_l8hbe_us_7.book Page 86 Friday, April 16, 2004 1:42 PM